Page 1 of Sony dvp SR760H mULTI REGION HACK REQUIRED

Help, I have one of the above and need a multiregion hack for it.

To perform this hack you need a OneForAll remote control. Here are the instructions for the OneForAll URC-7781 and the OneForAll 7040 remotes (I have the URC-7781 and it works ok with that, but I have not tested the 7040 remote). Any OneForAll remote should work providing you follow the principles detailed below.
Programming the URC-7781

---

1. Hold the Magic Key down for 3 Seconds 2. Select "Initial Setup" - Press Enter 3. Select "Device" - Press Enter 4. Select "Add Device" - Press Enter 5. Choose DVD from the list of choices - Press Enter 6. Select "Code Setup" - Press Enter 7. Enter Code 0533 - Press Enter 8. Press Esc until you get back to the Main Menu
9. Hold the Magic Key down for 3 Seconds10. Cursor Right and select "Advanced Setup" - Press Enter11. Select "Function" - Press Enter12. Select "Add Function" - Press Enter13. Cursor Right and select "Add Key Magic" - Press Enter14. Cursor Right and select the newly added DVD Device

15. Press The Magic Button (Do not hold)16. Enter the code 00189 (Once entered "KM Source" changes to "KM Destination" on the remote control display)17. Press 1 to store this code against button 1
18. Press The Magic Button (Do not hold)19. Enter the code 00255 (Once entered "KM Source" changes to "KM Destination" on the remote control display)20. Press 2 to store this code against button 2
21. Press The Magic Button (Do not hold)22. Enter the code 00095 (Once entered "KM Source" changes to "KM Destination" on the remote control display)23. Press 3 to store this code against button 3
24. Press The Magic Button (Do not hold)25. Enter the code 00221 (Once entered "KM Source" changes to "KM Destination" on the remote control display)26. Press 4 to store this code against button 4
27. Press The Magic Button (Do not hold)28. Enter the code 00079 (Once entered "KM Source" changes to "KM Destination" on the remote control display)29. Press 5 to store this code against button 5
30. Press Esc until you get back to the Main Menu

Programming the 7040

---

1.Select DVD device on remote 2.Hold Magic button until DVD button flashes twice 3.Press 0, 5, 3 and 3 4.Put a disc in player and put player onto welcome screen 5.Hold Magic button down until DVD button on remote flashes twice 6.Press 9, 9 and 4 7.Press Magic button 8.Press 1, 8, 9 and 1 9.Repeat steps 2 to 4, then press 2, 5, 5 and 210.Repeat steps 2 to 4, then press 0, 9, 5 and 311.Repeat steps 2 to 4, then press 2, 2, 1 and 412.Repeat steps 2 to 4, then press 0, 7, 9 and 5

Once your remote control is programmed

---

1. Make sure the DVD player has no disc in it and is powered off2. Press 1, 2, 3, 4, 5 on the OneForAll remote control. After a few seconds the DVD player will automatically turn on3. Wait for the "No Disc" message4. Press 1, 2, 3, 4, 5 on the OneForAll remote control. After a few seconds the DVD player will automatically turn off5. The DVD Player is now Multi-region

This item was edited on Tuesday, 11th September 2012, 23:47