RE: Multi Region hack for Trutech T600-D posted by Hackeroonie on Sunday, 17th September 2006, 01:22
Hamai47
Here is a Couple of Trutech Hacks for you to try
Turn the Player On And Open the Disk Tray / Lid ( Leave Open ). Using the Remote Control Enter Numbers 3 5 9 7 ( A Hidden Menu will Appear Showing the Current Region Code). Using the Remote Control Press the Enter Button Until you Reach The Required Region Code ( 1~ 6 For Region Specific or 9 For Region Free) Close The Disk Tray / Lid .
or this one
1 - Turn the Player On And Open the Disk Tray / Lid ( Leave Open ). 2 - Using the Remote Control Enter Numbers 8 1 3 2 8 ( A Hidden Menu will Appear Showing the Current Region Code). 3 - Using the Remote Control Press the Enter Button Until you Reach The Required Region Code ( 1~ 6 For Region Specific or 9 For Region Free) 4 - Close The Disk Tray / Lid.
If Either of them do not work then Here is a Page of Trutech Hacks ..your Player is Not Listed ...Try one of the Others they May work you never know.
RE: Multi Region hack for Trutech T600-D posted by Top Gun on Tuesday, 27th February 2007, 21:36
Ok! I found this one and is running with my player T600-D:
1. Press SETUP 2. Press 8, 8, 8, 8 3. Press NEXT CHAPTER (4 times) 4. Current RC should be displayed , upper right 5. Select RC with LEFT/RIGHT (255= codefree) 6. Press SETUP 7. Turn the player off
If you have any problems with this service or complaints concerning other users, please email the explaining the problem and we will do our best to assist you.
Multi Region hack for Trutech T600-D
Anyone out there got a multi region hack for a Trutech T600-D DVD player. ALL postings greatly appreciated
